STAGING SITE | db: colonyhardwarestage

ANCHORAGE CONNECTORS

P14-9070

Werner ¾” Reusable Concrete Anchor

Werner Reusable Concrete Anchor is a lightweight, easy to use bolt providing convenient anchorage in concrete. The anchor requires a pre-drilled hole of 3/4” and 3” deep in 3000 psi concrete. It can be used in any direction as a fall protection anchor and is reusable with its easy to insert and remove design. Color: blue.

Call for Pricing

P14-9069

Werner I-Beam Sliding Anchor

Werner I-Beam Sliding Anchor is a lightweight, adjustable clamp which attaches to I-Beam flanges and slides along the beam as the user moves. The Aluminum design fits beam flanges from 3-1/2” to 14” with thickness of 1-1/4”. Easy to adjust in and out and its design moves smoothly along the beam.

Call for Pricing

P14-9068

4’ Werner Concrete Pour-In Disposable Anchor Strap

Werner disposable concrete anchor straps are convenient temporary anchor solutions for use in concrete forms. They are designed with two web loops, one for pass through and one which should protrude from the concrete form and be cut off after one-time use.

Call for Pricing

P14-7807

Falltech Expansion Wedge Anchor for Concrete - 5,000 lb.

Features swaged-eye connection point. Requires 3-1/2" min. hole depth and 3/4" max. hole diameter. Assembled with galvanized and stainless steel components. For temporary use in cured concrete walls and ceilings. Complies with ANSI Z359.18-2017.

Call for Pricing

P14-0337

Beamer 2000 Anchor

Follows effortlessly above or behind workers. Fits structural steel beams 3 1/2" to 14" wide; up to 1 1/4" thick. Can be used on top or bottom beam flanges. Lever-locking end piece makes size adjustment simple. Lightweight and easy to carry (3 1/2 lbs.).

Call for Pricing

P14-0693

Fixed Beam Anchors

Installs in seconds to the beam structure providing a 5,000 lb. rated anchor point for horizontal and vertical applications. Anchor is easily installed by sliding the adjustable hook-end down to the flange and securing a pin. Easily adjust to exactly where you want it.

Call for Pricing

P21-0217

DBI Sliding Beam Anchors

Versatile size ranges to fit a variety of beams. Snap-in design of wear pads allows them to be replaced quickly in the field. 360-degree swiveling D-ring optimizes your mobility on the beam. Integrated dual ratcheting system. High-strength, lightweight steel and aluminum construction. Meets ANSI Z359.18 Anchorage Connector standard; OSHA 420 lb./ANSI 310 lb. ratings.For complete horizontal mobility, the Sliding Beam Anchor enables you to tie off overhead or at your feet with a lanyard or self-retracting lifeline. Enjoy total fall protection, along with freedom of movement, as the anchor effortlessly slides across the beam on its wear pads, eliminating metal-to-metal contact. Pins install from the top and have a built-in retention system to prevent pin loss or damage. Installs in seconds.

Call for Pricing

P14-0676

Miller Beam Clamp

Steel anchor point that can be attached to horizontal I-beams, S-beams or W-beams. Its swivel attachment ring prevents twisting of the worker’s connecting device. Two sizes available.

Call for Pricing

P19-0427

Guardian Fall Protection Concrete Anchor Strap

Sheathed in heavy duty nylon webbing to protect the inner core from abrasion and wear, and is one of the most cost effective anchors around. It can be installed as a permanent anchor during building construction, and can also be used in temporary applications such as wood framing, rebar work, or pipe racking.  Loop and D-ring ends.

Call for Pricing

P10-0289

Cross Arm Strap

Cross arm straps easily install by wrapping around and cinching down to a structural anchor, and are ideal for use in locations where substrate penetrations are not desired.  Pass through large and small D-rings.

Call for Pricing

P10-0292

Premium Cross Arm Strap

Cross arm straps easily install by wrapping around and cinching down to a structural anchor, and are ideal for use in locations where substate penetrations are not desired. Premium Cross Arm Strap are designed with dual reinforced webbing and heavy-duty stitching for superior durability and resistance to wear.

Call for Pricing

P14-0368

Concrete Anchor Strap

This disposable anchor strap is designed to provide temporary anchorage on concrete forms. The loop on the end of anchor strap slips over the rebar, and concrete is then poured on top of loop and wear pad providing a safe 5,000 lb. anchorage point. When the strap is no longer needed, simply cut strap and discard. The strap is made from 1 3/4" wide polyester webbing with a full length outer wear pad for abrasion resistance. A forged alloy steel D-ring provides a compatible connection point for a lanyard or self-retracting lifeline. Length: 3 1/2’. Other lengths available.

Call for Pricing

P14-0375

DBI/Sala Tie-Off Adapter

This pass-through tie-off adapter is designed to be used as a fall protection anchorage device. Made from 1 3/4" wide polyester strength member and 3" wide polyester wear pad.

Call for Pricing

P21-0221

Werner Cross-Arm Strap

Made with durable polyester webbing, the Werner 6’ Cross Arm Strap is designed to be wrapped around structures to create a secure anchor point. These anchors feature a D-ring sized to pass through an O-ring for convenient, quick, and easy anchor solutions.

Call for Pricing

P14-0661

D-Ring Anchorage Plate

Bolt or weld to structure. Two 1/2" diameter attachment holes. Plate size 1/4" x 2" x 4 1/2". D-Ring cadmium-plated with stainless steel anchorage ring.

Call for Pricing

P13-9912

DBI Concrete D-Ring Anchor

Reusable D-Ring assembly - drill hole in set concrete, insert and torque anchor; for temporary, or permanent applications; fits 11/16" or 3/4" holes (standard drill bits); connection swivels 360°.

Call for Pricing

P13-9949

Replacement Bolts for DBI Concrete D-Ring

Replacement Bolts for DBI Concrete D-Ring. Fits DBI Model # 2104560. Sold as each.

Call for Pricing

P14-2432

Mega-Swivel Concrete Anchor

10K Mega-Swivel Steel Anchor is a robust anchorage bolt for use in concrete applications. The bolt requires a pre-drilled hole of 3/4 inch and 5 inches depth in 3000 psi concrete with minimum concrete thickness of 7 inches. The D-ring swivel provides a full range of motion at the anchorage.

Call for Pricing

P12-2204

PitchPro

Designed for sloped-roof asphalt shingle construction. The PitchPro is the perfect solution for both new and existing construction, and its low-profile installation makes it an excellent choice for finished roof tops. Its oversized connection point makes attaching and detaching easy and bind-free. Made from robust powder-coated steel, resists damage from repeated installations, and ensures the longest possible lifespan. Suitable for wood, metal, or concrete substrates. Color: gray.

Call for Pricing

P14-0726

Cross Arm Strap

Cross Arm Straps are durable anchorage connectors for many applications.  Features include a pass-thru loop end design for easy use.  To shorten the anchorage connector simple wrap the webbing around the anchorage and pass through the loop end.  Cross Arm Straps are convenient end points for use with horizontal lifeline systems.

Call for Pricing

«« Start « Prev 1 2 Next » End »»

Display Results per Page

Results 1 - 20 of 25