STAGING SITE | db: colonyhardwarestage

AUTOMATIC GAS FASTENING SYSTEMS

Gas Fastening Systems Related Products Wood to Concrete Steel Track to Steel
Steel to Concrete Plywood to Concrete Exterior Track to Concrete


P15-1534

TrakFast Tool by Ramset®

This fully automatic tool can drive up to 1 1/2" pins three to five times faster than a traditional powder actuated tool. TrakFast’s magazine holds 42 pins. Once the tool is fired, the piston is automatically reset. Since there is no recoil, the tool absorbs the shock resulting in less operator fatigue. TrakFast uses a 6 volt rechargeable battery and a clean burning fuel cell, thereby eliminating the need for changing power loads. No licensing is required either. The gun’s narrow nose and profile allows the tool to reach inside deep track (1 5/8” wide x 2” high). Applications include fastening plywood, furring strips, waterproofing material and all types of track including hat channel, deep leg, Z and J channel, as well as standard track to steel, block or concrete. With Ramset’s TekPin, you can fasten metal-to-metal as well as metal to concrete without changing pins. Includes battery, charger and carrying case. Please note: Fuel Cell must be ordered separately.

Call for Pricing

P15-1574

Ramset® TrakFast Fasteners

All TrakFast Fasteners are sold in boxes of 1,000 and include a fuel cell.

Call for Pricing

P95-5144

Trak-It® C5 Tool

The all new fuel injected Trak-it® C5 cordless concrete pin nailer is the lightest and smallest tool in its class, resulting in less operator fatigue and a better overall ergonomic feel.  C5 has the greatest power output at 105 Joules, which allows for shooting into even the hardest concrete, able to shoot pins up to 1-1/2" in length, and is the only tool in its class that shoots .102, .108, .120 and .145 diameter pins.  No other tool can make this claim!  The rechargeable nickel metal hydride battery can fire up to 5,700 shots.  The Trak-It system is designed to be used for light duty static applications such as drywall track to concrete, block or steel, lath to concrete or block, furring strips to concrete or block, and plywood to concrete or block base materials. Includes 1 batteries, charger and carrying case. Please note: Fuel Cell must be ordered separately.

Call for Pricing

P95-5310

Trak-It® C5 Standard Straight Pins

Call for Pricing

P95-5336

Trak-It® C5 Concrete and Steel Pins Structural

Call for Pricing

P95-5340

Trak-It® C5 Specialty Spiral Knurl Pins

Call for Pricing

P95-5325

Trak-It® C5 Specialty Tapered Short Pins

Call for Pricing

P95-5128

95-5128

Call for Pricing

P95-5171

95-5171

Call for Pricing

P95-5161

95-5161

Call for Pricing

P95-5130

95-5130

Call for Pricing

P95-5020

Trak-It® C3 / C4 Fasteners By Powers

Trak-It® Fasteners and Trak-It® Fuel Cells are designed to be used with the Powers Trak-It® Tool and can also be installed with the ITW Ramset® TrakFast® tool. Ten fasteners are collated on each patented, plastic top hat-style strip. Each package contains 1000 fasteners and 1 fuel cell.

Call for Pricing

P95-5080

Stick-E™ Pins

These step shank style pins are designed to be used in the Short Trak-It® Tool as the fastener for all Stick-E™ accessories.

Call for Pricing

P95-5060

Stick-E™ Mini Conduit Clip

For attaching conduit and light duty pipe to walls and ceilings of any base material including wood, steel beams, concrete and steel purlins. Recommended Pin Size: Item 89-5187 3/4" x .102" CCN Pins (all base materials).

Call for Pricing

P95-5056

BX Clip

For attaching 3/8" dia. flexible BX cable to walls and ceilings of any base material including wood, steel beams, concrete and steel purlins. Recommended Pin Size: Item 89-5187 3/4" x .102" CCN Pins (all base materials).

 

Call for Pricing

P95-5065

Stick-E™ Strap Metal Washer

For attaching duct straps to suspend HVAC duct work onto ceilings of various base materials. Recommended Pin Size: Item 89-5187 3/4" x .102" CCN Pins (all base materials).

 

Call for Pricing

P95-5550

Stick-E™ Right Angle Clip 90°

For attaching pencil rod, hooks and wire assemblies. Recommended Pin Size: Item 89-5187 3/4" x .102" CCN Pins (all base materials).

 

Call for Pricing

P95-5101

Stick-E Lathing Washer

For attaching wire lathe to wood, steel, concrete or block for the purpose of troweling stucco in exterior applications or plaster in interior applications. Can also be used as a general purpose washer. Recommended Pin Size: Item 89-5187 3/4" x .102" CCN Pins (all base materials).

Call for Pricing

P15-1618

GypFast Cordless Coil Nailer

Fully Automatic Cordless Gas Fastening System for attaching exterior sheathing to light gauge steel framing.  Fully automatic system with 150-nail capacity is 3-5 times faster than screws.  Fast set-up and tear down; insert battery, fuel cell and nail coil.  Easy to use with self-contained power source eliminates need for extension cord, hoses and compressors.  Aggressive, patented nail shank design provides high pullout performance.  Contoured bugle head style provides high pullover (wind) resistance. Long life Climacoat™ finish is 10 times more corrosion resistant than electro-zinc plating.  Applications include:  exterior gypsum sheathing to steel framing, plywood and OSB sheathing/flooring, fiber cement panel attachment, blocking, exterior walls, windows/door bucks, specialty exterior sheathing attachment, woven wire mesh or expanded metal lath to steel framing.  Includes:  GypFast Cordless Coil Nailer, (2) batteries, battery charger, carrying case and safety glasses.

Call for Pricing

P15-1619

Fasteners for GypFast Cordless Coil Nailer

Call for Pricing

«« Start « Prev 1 2 Next » End »»

Display Results per Page

Results 1 - 20 of 22