STAGING SITE | db: colonyhardwarestage

HEATERS

P19-1381

Multi-Fuel Heat Penetration Heater

Safer and deeper heat penetration with less intensity. Clean Exhaust by perfect combustion. Low noise design allows for quiet operation. Non-open flame safety design. Space saving, thin-flat design. Built-in-thermostat and timer function. This heater carries the properties of far infrared heat which by nature is able to penetrate deeper into objects in the way sun light works.

 

 

Call for Pricing

P19-1265

MIlkhouse Electric Utility Heater

Heavy duty electric utility heater, with automatic thermostat. Two settings 1000W and 1500W, 3412 BTUs at low, 5118 at high. Other features include tip over protection, fan forced coils, overheat protection, auto shut-off and more.

Call for Pricing

P19-1299

Portable Ceramic Heater

1500-Watt ceramic heater with 3 heat settings, a fan-only setting and an adjustable thermostat. Advanced safety system includes an overheat protection sensor that prevents it from getting too hot, a stay-cool body with molded handle and a safety tip-over switch. A convenient indicator light lets you know when the heater is on.

Call for Pricing

P12-1247

Portable Electric Heater

Features three heats with an automatic control: Low (radiant heat, no fan), Medium (fan forced), and High (radiant and fan forced). Automatic thermostat controls desired comfort level. Tip-over switch automatically shuts off heater should it tip forward or backwards. Heats room up to 12' x 12'. Comes with 6’ cord. Maximum BTU’s per hour: 5,118. Weight: 9 lbs. Color: Hammertone Beige. 120 volts.

Call for Pricing

P12-1249

Portable Ceramic Heater

Compact ceramic heater. Seperate heat modes high/low settings and fan only mode. Safety overheat protection and adjustable thermostat for comfort control.

Call for Pricing

P19-1280

Oil Filled Convection Radiator Heater

Features three heat settings operation and an adjustable thermostat. Permanently sealed 5-channel design that never needs to be refilled. It has 360 degree swivel wheels, safety tip-over switch, stay cool molded handle, overheat protection sensor and power indicator light. 120V. Cord 6' polarized cord, 5,120 BTUs. ETL approved.

Call for Pricing

P12-2286

Construction Site Utility Heater

Heavy duty fan forced electric heater with a steel tubular element. Built-in thermostat. 240 volt, 1 phase motor. Comes with a 20 amp NEMA 6-20 plug configuration. Internal overheat thermostat for safety. Comes with 6’ cord. Weight: 15 lbs. Size: 10 1/4"(W) x 12"(H) x 7 1/2"(D). U.L. listed.

Call for Pricing

P12-2288

Electric Unit Heater

Designed as a heavy duty portable, wall hung or ceiling suspended unit heater. Swivel base. Temperature control thermostat with 35°F to 85°F range.  Finned steel tubular heating element. Internal manual reset thermal cut-out. Comes with a 30 amp NEMA 6-30P plug configuration. 6' long cord with molded plug.  Weight: 20 lbs. Size: 13 1/2"(W) x 17 1/2"(H) x 11 1/2"(D). U.L. listed.

Call for Pricing

P12-2287

Portable Electric Salamander

Designed for construction site heating, or emergency heating and drying. 10" rubber wheels for easy mobility. Safety yellow heater enclosure has safety screens on both air intake and output openings. Long-life finned tubular heating elements, high-limit thermal cutout switch with automatic reset. Thermostat adjusts from 40° to 100° F. Toggle switch for fan only operation. Salamander units are factory pre-wired for 3-phase delta operation. The units can be converted to Single Phase operation. However, please note that conversion to single phase voids C-UL®, UL®, and ETL Listings. 800 CFM. Weight: 51 lbs. Cable kit must be ordered separately, except for Item 12-2292, 10 foot cord comes preassembled.

Call for Pricing

P12-3041

Cable Kits For Portable Electric Salamander

This cable package includes 25 feet of Type SO jacketed cable. Each cable has 6” of the outer jacket removed at one end, and the other end terminated with #10 ring terminals.

Call for Pricing

P19-1449

Oil-Fired (Kerosene) Forced Air Heater

These high output portable heaters are designed to withstand the most rugged jobsite conditions. State of the art safety and reliability features. Uses no spark plug on models from 50,000-215,000 BTU’s eliminating incomplete combustion, and odor. Easy to operate-just fill with #1 kerosene and plug into a 110-115V 60 hz outlet. Units include built-in thermostat. Available for rental. Made in USA.

Call for Pricing

P19-2051

DeWalt 10,000W Forced Air Electric Construction Heater

Thermostatically controlled electric heater operates at 10,000 watts on a 240v single phase circuit. As a convenience, this heater can also be used at 7000 watts depending on which size circuit is available on your particular jobsite. Constructed with dual coil supports oversized ergonomic handle and very durable jobsite construction.

Call for Pricing

P19-1440

Patron Forced Air Heaters

Built for prolonged use in challenging situtions, powder coated steel housing and high quality sealed motor.  Heating, drying and ventilating.  Integrated ambient thermostat from 32°F - 104°F.  Overheat protection at 104°F.  Fast, high temperature rise with uni-directional fan.  UL and CSA approved.

Call for Pricing

P19-1464

PRO-SERIES Indirect Fired Forced Air Heater

Heatstar PRO-SERIES Indirect Fired Heater are highly efficient devices that provide large volume of 100% clean, dry and fume free warm air. Powerful internal fans along with a heat exchanger allow the placement of this heater outdoors while delivering heated air up to 50’ through ducting at 1,060 CFM, thereby eliminating exposure to fumes inside. Either place the heater outside the space and duct the warm air in or for a fuel savings you can place the heater in the space to be heated and vent the exhaust out. Optional thermostat available for constant temperature control. Automatic electric safety and control devices are standard equipment. Uses: Kerosene, Diesel 1# or 2#, Fuel Oil, Jet A fuel.

Call for Pricing

P19-1443

Propane Forced Air Heaters

Rugged two-piece spite barrel, designed to make cleaning and maintenance easier and safer.  Continuous electronic ignition is always present as a source of ignition for unburned fuel, reducing the ability for fuels to pool and collect in a dangerous manner.  Solid spark ignition. Includes:  L.P. Hose and regulator.

Call for Pricing

P19-1983

Vented Kerosene Heater

Produces clean, dry, and safe indirect heat suitable for drying and heating building sites. Powerful internal fans along with a heat exchanger allow the placement of this heater outdoors while delivering heated air up to 50’ through ducting at 1,950 CFM, thereby eliminating exposure to fumes inside. Automatic electric safety and control devices are standard equipment. Can also be connected to a thermostat. Heavy duty wheels and built-in handle allow for easy jobsite mobility. BTU Capacity: 285,000. Uses Kerosene, Diesel 1# or 2#, Fuel Oil, Jet A fuel. 16” diameter output.

Call for Pricing

P19-1999

Val 6® Infrared Heater

This unique heater uses high intensity infrared heat that penetrates evenly and directly onto surfaces just like sunlight. Unlike traditional forced air heaters, the Val 6 is unaffected by wind or rain generating heat directly to the object without any air movement, thus no heat loss. Val 6’s combustion system produces no odor and no smoke while running. In fact, the Val 6 produces less than 2 parts per million of carbon monoxide making this suitable for running indoors. The Val 6 is also efficient, consuming 75% less fuel that a standard forced air “torpedo style” heater uses. Uses kerosene or diesel fuel. This is the perfect heater for jobsites, especially masons who need to keep walls and their workspaces warm.

Call for Pricing

P19-2003

Val6 Multi-Fuel Infrared Heater MPX

Same radiant heat technology as 19-1999, but compact in size.  MPX offers duel heating style uses both infrared and convectional heating to offer the highest efficiency heating. High / low output control.  The MPX is able to operate continuously for over 15 hours with low speed combustion which enables it to operate all night without refueling.  Effieicent burner allows it to operate quietly.  Safety features include: tip-over, flame monitor, electrical system protection, and overheat.

Call for Pricing

P12-2293

Propane Convection Heater

Big powerful heat in a compact design.  Matchless piezo spark igniter for easy lighting; operates on a standard 100 lb. propane cylinder. Automatic shut-off if flame is extinguished. 10-foot hose and regulator.

Call for Pricing

P19-1472

Propane Convection Heater

Equipped with a thermo-electric safety valve to shut the gas flow off if the flame ever goes out. The single knob is used to ignite the heater and control the heat from 30,000 to 80,000 BTU. Matchless piezo spark igniter for easy lighting; operates on a 20 lb. propane cylinder. 10-foot hose and regulator.

Call for Pricing

«« Start « Prev 1 2 Next » End »»

Display Results per Page

Results 1 - 20 of 26