Item P90-2027
Dry Diamond Vacuum Bits
Designed to be run on a 7" or 9" 5,000 RPM grinder or a standard core drill. Must be used with the Air Vacuum Swivel Assembly and connected to a good quality, two-stage vacuum. This bit will drill through brick, block and cured concrete while eliminating dust. Please note: Do not use in applications with steel (i.e. rebar) heavier than wire mesh. Thread size: 1 1/4"-12. Drilling depth: 9". For best results , use with contractor grade vacuum such as Fein Turbo II or Alto wet / dry vac see page ______.
| Item | Description | Attributes |
|---|---|---|
| 90-2027 |
Diameter: 1 1/2" Drill/Grinder Minimum Amps: 6 Minimum RPM: 1,600 Maximum RPM: 5,000 |
|
| 90-2029 |
Diameter: 1 3/4" Drill/Grinder Minimum Amps: 6 Minimum RPM: 1,600 Maximum RPM: 5,000 |
|
| 90-2031 |
Diameter: 2" Drill/Grinder Minimum Amps: 6 Minimum RPM: 1,200 Maximum RPM: 5,000 |
|
| 90-2033 |
Diameter: 2 1/4" Drill/Grinder Minimum Amps: 7 Minimum RPM: 1,200 Maximum RPM: 5,000 |
|
| 90-2035 |
Diameter: 2 1/2" Drill/Grinder Minimum Amps: 7 Minimum RPM: 1,200 Maximum RPM: 5,000 |
|
| 90-2037 |
Diameter: 3" Drill/Grinder Minimum Amps: 7 Minimum RPM: 800 Maximum RPM: 5,000 |
|
| 90-2039 |
Diameter: 3 1/2" Drill/Grinder Minimum Amps: 10 Minimum RPM: 800 Maximum RPM: 5,000 |
|
| 90-2041 |
Diameter: 4" Drill/Grinder Minimum Amps: 10 Minimum RPM: 700 Maximum RPM: 5,000 |
|
| 90-2043 |
Diameter: 5" Drill/Grinder Minimum Amps: 10 Minimum RPM: 700 Maximum RPM: 3,500 |
|
| 90-2045 |
Diameter: 6" Drill/Grinder Minimum Amps: 10 Minimum RPM: 600 Maximum RPM: 2,500 |