Item P89-2174
Metabo HPT Roofing Coil Nailer
The NV45AB2 1-3/4" Roofing Nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. 5.5 lbs., lightweight and well balanced for easy maneuverability. Bottom load magazine, convenient and easy for quick replenishment. Tool-less depth of drive adjustment, for precision nailing/flush driving. Carbide tipped push lever, reduces wear. Rubber safety valve cover, resists dirt and tar for prolonged life of tool. Rubber pads help keep nailer from sliding off roof when not in use. Quick driving, for maximum efficiency. Pneumatic power feed and return, allows tool to operate in the harshest conditions. Long-lasting rubber grip, for added comfort. Includes safety glasses and hex bar wrenches (2).
Depth Setting | Tool-Less |
Jam Clearing | Open Nose |
Actuation | Contact, sequential optional |
Operating Pressure | 70-120 psi |
Air Inlet | 3/8" |
Magazine Loading | Side |
Magazine Capacity | 120 Nails |
Fastener Diameter Range | 0.120 |
Fastener Length Capacity | 7/8" to 1 3/4" |
Magazine Angle | 16° |
Fastener Type | Coil, Wire Collation |
Dimensions | 9 27/32" (L) x 4 5/8" (W) x 10 3/8" (H) |
Weight | 5.5 lbs. |
Item | Description | Attributes |
---|---|---|
89-2174 |
NV45AB2 Roofing Nailer |